- Application areas
You have already received a conveyor from us and need the documentation?
Simply enter the project number and your contact details in the form below and we will send you the documentation including the connection plan.
If you already have a Vetter small conveyor, please always refer to the project specific documentation for your conveyor. Attention: Wrong connection destroys the electronics. If anything is unclear, please contact us.
Connection and commissioning using the 40 series as an example - for all Vetter small conveyors with Faulhaber brushless DC motors with integrated speed controller:
Connection and commissioning of FR-30-60 - Vetter small conveyor with Faulhaber brushless DC motor with integrated speed controller:
Connection and commissioning of FR-20-40 - Vetter small conveyor with Faulhaber brushless DC motor 1628-T-024-B with Vetter speed controller VR-30-15-INT.
Connection and commissioning of FR-20-20-M - Vetter small conveyor with Faulhaber brushless DC motor 3242-G-024-BX4 with speed controller SC 2804.
Speed control of the Vetter small conveyor with the VSW-11 setpoint device. Please also observe the connection plan of the respective conveyor!
Speed control of the Vetter small conveyor with the VR-24-SW-11 setpoint device with voltage supply. Please also observe the connection plan of the respective conveyor!
The Faulhaber motors series 2232, 3242 and 3268 offer the possibility of a digital output by connecting the green cable.
Instructions can be found in the Faulhaber technical manual on page 44 - "5.3 Configuration of the digital output".
Have you already received a conveyor belt from us and need the declaration of incorporation?
Depending on the conveyor belt type, please select the declaration of incorporation in your language for download.
|Modular Kit||Internal Drive||Centre Drive||Transverse Drive|
To calculate the weight of a Vetter small conveyor, please use the table below. The calculated weight according to the table corresponds almost to the real weight of the conveyors, but does not include special features such as additional lateral guides or workpiece carriers.
Vetter small conveyor FR-40-160-500
"500" = centre distance in mm
4,0 kg (base weight) + 4,5 kg x 0,5 m = 6,25 kg
|Conveyor type||Base weight||Surcharge per metre (center distance)|
|FR-20-20-M||2,1 kg||+ 0,7 kg per metre|
|FR-20-40||0,3 kg||+ 1,4 kg per metre|
|FR-30-60||0,9 kg||+ 1,9 kg per metre|
|FR-/ZR-40-80||2,1 kg||+ 3,2 kg per metre|
|FR-40-120||3,1 kg||+ 3,8 kg per metre|
|FR-40-160||4,0 kg||+ 4,5 kg per metre|
|FR-40-200||5,0 kg||+ 5,2 kg per metre|
You can find out more about our drive and control technology / setpoint devices on the following page.
Already have a clear idea about the conveyor you want? Our product finder can help you find what you are looking for fast.
Our selection of conveyor belts is just as varied as our product range. Combine the appropriate belt with our conveyor models.